Brand: HILDA

Wavelength: 532nm (Green) 
Horizontal/vertical: ±0.2mm/10m
Automatic leveling-range: ±3°
Working temperature: -5℃ to 50℃
Waterproof grade: IP54
Working distance: 25m
Tripod stand interface: 5/8″

Instructions

1)Place the instrument on the tripod, T-type wall mounting bracket or lifting platform as needed;

2) Push the main power switch forward to the ON position and the machine starts to work.The horizontal window automatically opens and produces four horizontal laser rays;

3) Touch H key on the touch panel to control horizontal opening and closing;

4) Touch the V key on the touch panel once. open a vertical window with one click (tick). rebeat aain, the second verticalwindow opens, and the third touch closes two vertical windows;

5) Long touch the key for more than 3 seconds. and a click(tick)will be heard, and turning on the diaaonal function. At this time,you can adjust it to the angle vou want without alarm or flashing.Touch this key again for more than 3 seconds. with one click (tick) to release this Cfunction, the instrument works normally.

Note: The positive and negative terminals of the battery are TTproperly installed.Please remove the battery if it is not used for along time.Please charge for more than 10 hours when vou use it for the first time. Please turn off the main switch after use.

Please use the charger that matches the machine to charge.

Please use this machine in the environment where this machine is described.

Note:
The laser output maker is located on the output hole.
Do not stare directly at the laser light.
Do not disassemble the instrument and perform internal repairs by yourself.
This instrument meets the laser radiation safety rating standard.