1. Working voltage: DC9V-72V
2. Quiescent condition: Less than 8mA
3. Working temperature: -40 Degree +80 Degree
4. Receiver sensitivity: more than -105dBm
5. Working frequency: 433mhz
6. Output voltage: Input=output
8. Max load current: 30A

Relay Remote Control Operation Instructions
Easy to operate, clear steps, suitable for all scenarios. Please follow the steps below to complete the setting.
🔘 Function Mode Instructions
1. Jog Mode (Point-to-Point Mode)
① Press the learning button once briefly, the LED flashes once.
② Press button A on the remote control.
③ The LED flashes three times → Jog mode learning is successful.
2. Self-locking Mode
① Press the learning button twice briefly, the LED flashes twice.
② Press button A on the remote control.
③ The LED flashes three times → Self-locking mode learning is successful.
▸ Operation: Press button A once to activate the relay; press button A again to deactivate the relay.
3. Interlocking Mode
① Press the learning button three times briefly, the LED flashes three times.
② Press button A once, the LED flashes three times.
③ Immediately press button B once, the LED flashes three times → Interlocking mode learning is successful.
▸ Operation: Press button A to activate the relay; press button B to deactivate the relay.

⏱ Delay Function Instructions
1. 5-Second Delay Setting
① Press the learning button four times briefly, the LED flashes four times.
② Hold down button A on the remote control.
③ The LED flashes three times → Setting is successful.
▸ Operation: Press button A once, the relay will automatically disconnect after 5 seconds of activation.
2. 10-Second Delay Setting
① Press the learning button five times briefly, the LED flashes five times.
② Press button A on the remote control.
③ The LED flashes three times → Setting is successful.
▸ Operation: Press button A once, the relay will automatically disconnect after 10 seconds of activation.
3. 15-Second Delay Setting
① Press the learning button six times briefly, the LED flashes six times.
② Press button A on the remote control.
③ The LED flashes three times → Setting is successful.
▸ Operation: Press button A once, the relay will automatically disconnect after 15 seconds of activation.
🗑 Code Clearing Operation
Press and hold the learning button for about 8 seconds until the indicator light flashes → Code clearing is successful.
⚠ Warm Prompt
Important: Before switching to any working mode, you must clear the code first, then relearn the mode.
If you have any questions about the operation, please contact our customer service at any time.

Wide Application
This remote switch is used in industrial control and safety fields, such as lighting, motors, lamps, fans, dust collect, remote control, wireless security alarms, wireless door alarms, wireless controllers, etc.

Package include
Option Package 1:

Receiver module * 1pcs ( include Shell )

Remote Control * 2pcs (include battery )


Option Package 2:


Remote Control * 1pcs (include battery )

Option Package 3:

Receiver module * 1pcs ( include Shell )

Option Package 4:

Receiver module * 1pcs ( include Shell )

Remote Control * 1pcs (include battery )