Learn to code:

1. Jog learning method:

Press the learning button of the controller once, the indicator light flashes quickly and it is in the learning state, and then press any button of the remote control you want to learn to send a code. At this time, the indicator light flashes three times and goes out, and the code matching is completed.

2. Self-locking learning method:

Press the controller learning button twice, the indicator light flashes twice quickly in the learning state, and then press any button you want to learn on the remote control to send a code. At this time, the indicator light flashes three times and goes out, and the code matching is completed.

3. Interlocking learning method:

Press the controller learning button three times, the indicator light flashes three times quickly in the learning state, at this time press the remote control A button, the indicator light flashes three times, and then press the remote control B button again, the indicator flashes three times and goes out, and the code matching is completed .

4. Learning method with a 5-second delay:

Press the controller learning button four times, the indicator light flashes four times and then press the remote control to send a code, the receiver indicator flashes three times and then the learning is successful, then press the remote control to send the code, the relay will automatically disconnect after 5 seconds of closing.

5. Learning method with a 10-second delay:

Press the controller learning button five times, the indicator light flashes five times and then press the remote control to send the code, the receiver indicator flashes three times and then the learning is successful, then press the remote control to send the code, and the relay will automatically disconnect after 10 seconds.

6. Learning method with 15 seconds delay:

Press the controller learning button six times, the indicator light flashes six times and then press the remote control to send a code, the receiver indicator flashes three times and then the learning is successful, then press the remote control to send the code, and the relay will automatically disconnect after 15 seconds of closing.

7. Learning method with a delay of 20 seconds:

Press the controller learning button seven times, the indicator light flashes seven times and then press the remote control to send the code, the receiver indicator flashes three times and then the learning is successful, then press the remote control to send the code, and the relay will automatically turn off after being closed for 20 seconds.

Clear data:

Press and hold the learning button for 8 seconds without letting go, the indicator light flashes once until the receiver indicator flashes 6 times quickly, the code clearing is successful

Features:

1:Perfect small size (Note: Package included sided tape)

Different installation scenarios:

–Use double-sided tape to directly install and fix the receiver on the surface of the object;

–Put the receiver install behind a power outlet;

–Install behind the suspended ceiling.

2:Flexible DIY control method

–Multi switches Control One/Multi Lights Receiver in the meanwhile

3:Multiple control modes to Save electricity

–At any time, you can either use the front panel or remote control.

–Set the remote control at different locations to quickly turn on or off the lights.

–Turn the lights on in advance to avoid darkness,

–Turn off the lights after leaving, save energy.

Product Application Area Products can be used in homes, farms, factories, offices, laboratories, supermarkets and so on

Remote control Electric curtain Water pump Fan Lamp LED light bulb ventilation device Signal transmission

Remote control humidifiers, microwaves, coffee machines

Remote control Taking Care for the elderly, children

50m receiving distance
Powerful chip, the receiving distance can reach 50 meters

Easy To Install

Anywhere Installation