reminder:

1. Please do not puncture the atomizing plate at the spray mouth!!!

2. Before the first use, please remove the cotton swab (be careful not to lose the spring at the bottom), soak it in water for 1-2 minutes, let the cotton swab absorb enough water, and then put it back on for use.

3. Only tap water or mineral water can be used, pure water cannot be used (it will affect the fogging effect)

Usage and functions:

1. Turn on the power supply, gently press the key to start the continuous spray mode, click the key again to start the intermittent spray mode (spray for 4 seconds and stop for 6 seconds), and press the third time to turn off the machine.

2. When turning on the device, press and hold the button for two seconds to turn off the night light (rainbow light), and then press and hold to turn on the night light.

3. All spray modes are set to automatically power off after 3.5 hours, and can be restarted for further use.

4. For the first use, fill it with water (about 90%) and let it sit for 3-5 minutes before turning it on.