NOTE:

1. The WiFi Version does not require a Hub, it requires WiFi 2.4GHz

2. Zigbee Version requires Tuya Zigbee Hub or Tuya multimode gateway, and does not support third party gateways, zigbee2mqtt is not supported.

Product Features:

1. Water poof, water leak detection
The sensor can detect whether there are water leakage at the installation location. If this is found, the information will be pushed to the phone immediately.
2. Easy to Install
The installation of the sensor is very simple, you can use adhesive taps or screw (included) set to install at the location you need to install, please note that the installation location can be connected to the wifi router..
3. Use Wi-Fi, No hub is required
The sensor uses Wifi to communicate with the server for data. As long as there is a wifi network connected to the Internet at home, it can meet the installation conditions.
4. Remote Monitoring
The alarm information and records of the sensors are all stored on the server. This design allows us to monitor whether there is water in the home or office from any place through the smartphone. And can also share the control information of the device to others.
6. Low battery consumption
The power consumption of the sensor in standby mode is very small, and two LR03 AAA batteries can be used for one year. And when it detects that the battery is low, it will remind you to replace the battery through the alarm message.

Product Parameter:

Power supply: Battery: LR03-1.5V/AAA*2(not include)
Wireless Type: 2.4GHz IEEE 802.11b/g/n(WiFi Version)/Tuya Zigbee(Zigbee Version)
Working Temperature: 0℃～40℃ (32℉ ～104℉ )
Working Humidity: 20%～85% RH
Storage Humidity: 0%～90% RH
App: Tuya smart (Supports Android 4.4 and iOS 8.0 or newer)
Material: ABS

APP Remote Control

APP control, connected to the network via Wi-Fi/3G/4G/5G, Remote control at any time. After the sensor detects the leak, it immediately pushes a message to your mobile APP

Where can I use it?

You can install it in anywhere you worried about water leakage. For example: Kitchen, sink, bathroom, fish tank. Or you can use sensors to remind yourself that a container is full of water.

Working Principle:

When the two feet of the detector was immersed by the water, the alert notifications will be pushed to your phone, be aware of water overflowing in time, reducing flooding risk.

Multi device installation support

1, Any location with 2.4GHz Wi-Fi cover can be installed
2, Generally, 2.4GHz Wi-Fi /Zigbee can stably communicate within 400ft.(depending on the strength of the shelter, of course)
3, You can use your mobile phone to test the signal intensity. If you have more than 20% of the signal intensity, you can install it. In addition, 5GHz is shorter than 2.4GHz, so as long as you make sure you use 2.4GHz Wi-Fi test
4, How many sensor are connected at home depends on the capabilities of the Wi-Fi router