Tips: If you need large quantity, we can provide wholesales for you. Thanks

 

Specification

 

Model: 130 Gear Motor

Torque: 9KG.CM

Weight: 33g

Voltage: 5.0V-12.0V

 

Test data:

Voltage: 5.0V   
No-load Speed: 30RPM 
No-load Current: 90mA 
Stall-torque :3kg.cm 
Stall-current :0.5A
——————————-

Voltage: 9.0V   
No-load Speed: 60RPM 
No-load Current: 100mA 
Stall-torque :6kg.cm 
Stall-current :0.8A

——————————-

Voltage: 12.0V   
No-load Speed: 82RPM 
No-load Current: 120mA 
Stall-torque :9kg.cm 
Stall-current :1.2A

——————————-

Note:

The test torque of the reduction gear motor is quite strong. The small plastic reduction motor can have a maximum stall torque of 9KG.CM. The deceleration also has an overload protection slipper. When it reaches about 10KG.CM, the force will slip. This design is estimated to prevent Damage to the gearbox caused by external force impacts. The slippers must not be used continuously for overload slipping, otherwise they will wear. The slippers are connected by elastic gears, and there will be abrasion between the gears for too long, and the slip protection torque will be reduced after wear.

 

The final gear of the motor is made of thick nylon material, the steel shaft of the gear shaft is reinforced, and the dual-speed reduction shaft is designed. The tail shaft can be equipped with sensing elements such as encoder limit switches for special purposes. Normally, when the reduction gear motor uses a tail shaft Generally not used.

 

Package Include:

Motor x 1 PCS