About this item

●. Motion Sensor Switch working voltage :85-265V ; Load Power :≤40W （the load power must be under 40W）； Best sensing distance:3-5M ;Installation Height:≥3.5m; Recommended Installation Hole:φ20mm
●. Infrared sensor switch has feature of small size , lightweight,energy-saving and lowheat . Easy to install and operate in room or cabinet, plug and play. The sensor switch can be embedded or surface mounted .It is perfect for using snesors in home corridor stairs basement.
●. Motion sensors will turns lights ON in the dark when human enter into the induction range and Off after 30S if the motion is undetected .It only work in night or dark .It is suggested that sensor installation height is about 3.5m;Best sensing distance is 2- 6M;Induction angle is front 120°
●. We designed the link terminal on the sensor switch, the sensor can be plug and play after the wire is connected, and it is also convenient to replace. Please see the product picture for the wiring diagram.
●. Widely Suitable for auto lighting corridors, stairs , bathrooms, basements, warehouses, garages,closet, advertisement light .In addition to control of LED lights, it can also be used to control exhaust fans, doorbells or other devices.

Product specifications

●. Name: PIR Human infrared sensor head (high-voltage version)
●. Working voltage: 85-265V AC
●. Shell size: H37.2mm * D27.5mm
●. Load power: ≤ 40W
●. Sensing distance: about 3-5m
●. Induction angle: 120 °
●. Opening size: diameter 20m ± 3mm
●. Weight: 11.8G
●. Delay time: 30 seconds
●. Working temperature: -20 ℃ -40 ℃
●. With light control: working at night or with light below 10LIX
●. Material: PC flame retardant
●. Scope of application: energy-saving lamps, incandescent lamps,
LE ceiling lamps