【Multifunction Timer Relay】Programmable delay modes to control the relay timings, widely used at smart home, industrial control, automatic irrigation, indoor ventilation, protection equipment etc.

【Load Range】Operating voltage: DC 6V – 30V, support micro USB 5V power supply. High level trigger: 3V – 24V. NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Timing range: 0.1s ~ 999mins (continuously adjustable).

【Reverse Protection】Built-in a diode to provide protection against accidental reverse polarity for the circuits.

【Sleep Mode】If no operation within 5 minutes, the digital tube of the relay board will turn off automatically. Pressing any button can wake it up.

【Parameter Setting】OP(conduction time) / CL(off time) / LOP(circuit times) can be set individually, and the parameters are mutually independent. All parameters are permanently saved once set. The functions and parameters can be reviewed or changed at a later time.

Specifications:

Operating voltage: DC 6V – 30V, supporting micro USB 5V power supply

Operating current: 50mA, static current: 20mA

Working temperature: -20—60℃

NO maximum load: < AC 250V/10A, < DC 30V/10A

Size: 6.4*3.8*1.7cm

Package List:

1/3PCS DC 6-30V Timer Relay Module with LED display(paper manual not included)

(Please choose the model and quantity you need,we will send the goods according to your choice.)

Kindly Note:

Before using, please check if the Relay Enable Mode is set to “ON” to ensure the full functionality of the relay. On the main interface, short press the “STOP” button to toggle between “ON” and “OFF”.

If timer relay board does not energize, or when timer relay board energizes but the load in the circuit can not be triggered to start, please try to apply some more power than expected. Especially for use with trigger signals and load on the wiring diagram of sharing one power supply, as they require additional power to actuate.

Long press “DOWN” button can switch F1 and F2 mode. F1 is the default mode: relay operating forwards, F2 is the opposite mode: relay operating backwards. As F2 mode is rarely used, some batch does not include this feature.