Load Cell 1KG 5KG 10KG 20KG HX711 24-bit Precision AD Module Weight Sensor Electronic/Kitchen Scale Aluminum Alloy Measurement
القسم: غير مصنف
Price range: 23 ر.ق through 33 ر.ق
شحن دولي
يرجى معاينة تفاصيل المنتج لمعرفة بلد المنشأ والشحن
Product sharing
- Brand Name: Jessinie
- High-concerned chemical: None
- Origin: Mainland China
- Output: Digital Sensor
- Theory: Hall Sensor
- Type: Biosensor
- is_customized: Yes
- Use: Pressure Sensor
- Material: Metal
Electronic scale sensor (range 1/5/10/20kg)
Product details:
Technical parameters:
1. Range: 10kg
2. Output sensitivity: 1.0±0.1mV/V
3. Nonlinearity: 0.03%F.S
4. Hysteresis: 0.03%F.S
5. Repeatability: 0.03%F.S
6. Creep: 0.05%F.S/3min
7. Zero output: -0.15±0.05mV/V
8. Output impedance: 1000±10 ohms
9. Four-corner error: 0.05%F.S
10. Temperature sensitivity drift: 0.03%F.S/10℃
11. Zero temperature drift: 0.3%F.S/10°C
12. Product size: 75×12.7×12.7mm
Technical parameters:
1. Range: 10kg
2. Output sensitivity: 1.0±0.1mV/V
3. Nonlinearity: 0.03%F.S
4. Hysteresis: 0.03%F.S
5. Repeatability: 0.03%F.S
6. Creep: 0.05%F.S/3min
7. Zero output: -0.15±0.05mV/V
8. Output impedance: 1000±10 ohms
9. Four-corner error: 0.05%F.S
10. Temperature sensitivity drift: 0.03%F.S/10℃
11. Zero temperature drift: 0.3%F.S/10°C
12. Product size: 75×12.7×12.7mm
Principle of use:
A weighing sensor is actually a device that converts mass signals into measurable electrical signal outputs. The weighing sensor consists of an elastic body (deformation block) and a strain gauge. Under the load of a heavy object, the elastic body deforms, causing the strain gauge attached to the surface of the elastic body to deform as well. Finally, the specific weight of the heavy object is obtained by processing the induction value of the strain gauge.
Application wiring instructions:
Power positive (E+) red, power negative (E-) black, signal positive (S+) white, signal negative (S-) green
Note: If there is a negative number during installation, please swap the signal line
Specific description:
Strain gauges are arranged on both sides of the elastic body (deformation block); the cross section of the elastic body is square, two intersecting through holes are arranged on one side of the elastic body, and strain gauges are arranged on the other two sides of the elastic body. The elastic body is provided with mounting threaded holes at both ends where the strain gauges are arranged, and the two intersecting through holes have the same diameter and are located in the middle of the deformation block.
The two intersecting through holes form an intersecting surface, and the strain gauge is arranged on the intersecting surface.
The strain gauges are symmetrically arranged on both sides of the intersecting surface.
The center distance of the intersecting holes is 7.0mm.
Two mounting threaded holes are arranged at both ends of the deformation block, and the specifications are both M4.
The strain gauge is glued on the flat end surface of the deformation block.
The strain gauge is connected to the terminal with enameled wire and protected by soft glue.
A wire is connected at the terminal, and soft glue is applied at the connection position for protection.
The soft glue completely covers the strain gauge.
Installation Instructions:
A weighing sensor is actually a device that converts mass signals into measurable electrical signal outputs. The weighing sensor consists of an elastic body (deformation block) and a strain gauge. Under the load of a heavy object, the elastic body deforms, causing the strain gauge attached to the surface of the elastic body to deform as well. Finally, the specific weight of the heavy object is obtained by processing the induction value of the strain gauge.
Application wiring instructions:
Power positive (E+) red, power negative (E-) black, signal positive (S+) white, signal negative (S-) green
Note: If there is a negative number during installation, please swap the signal line
Specific description:
Strain gauges are arranged on both sides of the elastic body (deformation block); the cross section of the elastic body is square, two intersecting through holes are arranged on one side of the elastic body, and strain gauges are arranged on the other two sides of the elastic body. The elastic body is provided with mounting threaded holes at both ends where the strain gauges are arranged, and the two intersecting through holes have the same diameter and are located in the middle of the deformation block.
The two intersecting through holes form an intersecting surface, and the strain gauge is arranged on the intersecting surface.
The strain gauges are symmetrically arranged on both sides of the intersecting surface.
The center distance of the intersecting holes is 7.0mm.
Two mounting threaded holes are arranged at both ends of the deformation block, and the specifications are both M4.
The strain gauge is glued on the flat end surface of the deformation block.
The strain gauge is connected to the terminal with enameled wire and protected by soft glue.
A wire is connected at the terminal, and soft glue is applied at the connection position for protection.
The soft glue completely covers the strain gauge.
Installation Instructions:
The sensor outlet is connected to the upper plate, and the other end of the sensor is connected to the base, with the middle suspended in the direction as shown.
Note: A protective device (such as a thimble) can be installed under the other end of the sensor to prevent damage to the sensor after overload. (Safety overload 150%, limit overload 200%)
Note: A protective device (such as a thimble) can be installed under the other end of the sensor to prevent damage to the sensor after overload. (Safety overload 150%, limit overload 200%)
| Color | 10KG With HX711, 1KG With HX711, 20KG With HX711, 5KG With HX711, Only 10KG Sensor, Only 1KG Sensor, Only 20KG Sensor, Only 5KG Sensor, Only HX711 Module |
|---|---|
| Brand Name | Jessinie |
| High-concerned chemical | None |
| Origin | Mainland China |
| Output | Digital Sensor |
| Theory | Hall Sensor |
| Type | Biosensor |
| is_customized | Yes |
| Use | Pressure Sensor |
| Material | Metal |
Suggested products
Hagibis 240W USB C to C Adapter 40Gbps 8K 60Hz 90 Degree Converter USB4 Adapter for Thunderbolt 4/3 MacBook iPhone 17 Pro Tablet
Price range: 27 ر.ق through 30 ر.ق
Hot Sale Car Water Cup Holder Mobile Phone Beverage Holder Trash Can Multifunctional Storage Box Auto Interior Accessories
35 QAR
1Pair Bow Head Grabs Clip Women Girl Hair Side Clip Forehead Bang Princess Small Hair Claw Clamp Hair Clip Styling Headdress
Price range: 23 ر.ق through 27 ر.ق
Interactive Scroll Dog Feeder Toy – Slow Feed Silicone Mat For Small To Medium Breeds, Intellectual Food Dispenser
Price range: 186 ر.ق through 190 ر.ق
Multi-Device Vertical Ergonomic Mouse With Function Adjustment Kno Rechargeable 2.4G Bluetooth Wireless Mouse for PC Tablet
Price range: 125 ر.ق through 133 ر.ق
ATK DragonFly A9 Air Ultimate Wireless Gaming Mouse PAW3950 Ultra 42000DPI 750IPS 8KHz RGB Ergonomic Design for Windows MacOs
Price range: 146 ر.ق through 421 ر.ق
You can add
Heavy Duty Cleaning Tools Storage Bag Multifunctional Tool Bag Waterproof Wear-Resistant Large Capacity Oxford Cloth Storage Bag
222 QAR
Hagibis 4K HDMI-Compatible Video Capture Card Loop Out for Game Recording Live Streaming 1080P Grabber MS2131 for PS4/5 Switch
123 QAR
Hagibis 240W USB C to C Adapter 40Gbps 8K 60Hz 90 Degree Converter USB4 Adapter for Thunderbolt 4/3 MacBook iPhone 17 Pro Tablet
Price range: 27 ر.ق through 30 ر.ق
1Pair Bow Head Grabs Clip Women Girl Hair Side Clip Forehead Bang Princess Small Hair Claw Clamp Hair Clip Styling Headdress
Price range: 23 ر.ق through 27 ر.ق
Backlit Wireless Ergonomic Mouse with Smart Flying Scroll,Function Adjustment Knob,Bluetooth&2.4G Rechargeable Gaming Mouse
168 QAR
Rapoo MT760/MT760L/MT760Mini/MT760M Rechargeable Multi-mode Bluetooth Wireless Mouse Ergonomic 4000 DPI Support Up to 4 Devices
Price range: 162 ر.ق through 174 ر.ق