The operation is simple, most of the dent removal can be completed within half an hour.
No need to disassemble the car.
This tool is not only used to remove car dents, but can also be used for DIY home repairs.

Steps for usage:
1. Clean the surface with a clean damp cloth.
2. Stick the glue stick on the gun, turn on the power, and warm up for 5-10 minutes.
3. Choose the glue pull tab according to the size of the dent, then put the heated glue on the pull

tab, immediately put the pull tab in the center of the dent and keep it until it sticks.
4. Let the glue cool for about 8-10 minutes. The cooling time should be less than 10 minutes, and it should be slightly shorter in winter.

5. After the glue cools, align it with a golden dent lifter or bridge dent puller, and press the puller to pull up the dent. Repeat the above steps until the dent disappears.
6. After the dents are completed, use 95% alcohol to clean the remaining glue on the surface of the car body with a plastic shovel.

Note: Excluding the glue gun, it needs to be prepared in advance or purchased separately