الرئيسية

دخول

تتبع الطلب

Keyestudio MQ-7 Carbon Monoxide CO Gas Sensor Detection Module for Arduino Sensor Starter DIY Electronic Project

حالة التوفر: متوفر في المخزون

45 متبقي
مدة الوصل المتوقعة إلى قطر:
[12 ر.ق] (8-14 أيام)
Please select a shipping method
تقدير التسليم
سعر
مرسل
Tracking
8-14 أيام
12 ر.ق
شحن افتراضي مختار
Yes
Frequently bought together:
Total: 2,236 ر.ق

شحن دولي

يرجى معاينة تفاصيل المنتج لمعرفة بلد المنشأ والشحن

مشاركة المنتج

  • is_customized: Yes
  • Theory: Gas Sensor
  • Model Number: MQ-7
  • Material: Mixture
  • Type: Gas Sensor
  • Output: Analog Sensor
  • Brand Name: keyestudio
  • Origin: Mainland China
  • Use: Gas Sensor
  • Product number: KS0045

The gas sensitive material used in MQ-7 gas sensor is SnO2, which is of lower electrical conductivity in clean air. It detects carbon monoxide with low temperature (heated by 1.5V) through high-low temperature cycles. The electrical conductivity of the sensor increases with the increase of the carbon monoxide concentration in the air. The change of electrical conductivity can be converted to the output signal corresponding to that of the gas concentration by using a simple circuit.
 
The sensitivity of MQ-7 gas sensor to carbon monoxide is quite high, so it can be used to detect various gas containing carbon monoxide. It is a low-cost sensor suitable for a variety of applications.
Feature
  • good sensitivity to carbon monoxide.

  • long service life, low cost

  • simple drive circuit

Application
  • household gas leak alarm

  • Industrial-level carbon monoxide gas alarm

  • Portable gas detector

Specification
  • Target gas: carbon monoxide

  • Detectable concentration: 300-10000ppm CO

  • Loop voltage Vc ≤10V DC

  • Heating voltage VH 5.0V±0.2V ACorDC(hight); 1.5V±0.1V ACorDC(low)

  • Load resistance RL adjustable

  • Heating resistance RH 31Ω±3Ω(Room temperature)

  • Heating power PH ≤350mW

  • Surface resistance of sensitive material Rs 2KΩ-20KΩ(in100ppmCO)

  • Sensitivity S Rs(in air)/Rs(100ppmCO)≥5

  • Concentration slope: α ≤0.6(R300ppm/R100ppm CO)

  • Temperature, humidity: 20±2;65%±5%RH

  • Standard test circuit: Vc:5.0V±0.1V;VH(high): 5.0V±0.1V;VH(low): 1.5V±0.1V

 
 

 


منتجات مقترحة

Keyestudio L298P quick connectors Motor Drive Shield For Arduino Extra 2.54mm pin headers 4 fixing holes of 3mm

98 ر.ق

Keyestudio Joystick Breakout Board for BBC Micro:Bit

80 ر.ق

Keyestudio Pico IO Prototype Expansion board for Raspberry pi Diy Kit Electronics for Adults STEM Education Programming Study

44 ر.ق

keyestudio I2C Interface Conversion Shield V1 For Arduino

36 ر.ق

Keyestudio Passive Buzzer Sensor For Arduino Sensor Module Compatible Lego Blocks High Quality Programming DIY Parts

تحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج

نطاق السعر: من ⁦34 ر.ق⁩ خلال ⁦35 ر.ق⁩

Atomizer Sheet ZJ-01 Holder Type C &USB Atomizer Drive Circuit And Double Spray Humidifier Atomization Module Accessories

تحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج

نطاق السعر: من ⁦64 ر.ق⁩ خلال ⁦95 ر.ق⁩

بإمكانك إضافة

Keyestudio BMP280 5V Digital Barometric Pressure Altitude Sensor High Precision Atmospheric Module For Arduino

37 ر.ق

keyestudio I2C Interface Conversion Shield V1 For Arduino

36 ر.ق

Keyestudio Edge Connector I/O Sensor Breakout Expansion for BBC Micro:bit Microbit

36 ر.ق

Keyestudio NANO IO Shield Controller Terminal Adapter Expansion Board for Arduino Nano

35 ر.ق

Keyestudio Passive Buzzer Sensor For Arduino Sensor Module Compatible Lego Blocks High Quality Programming DIY Parts

تحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج

نطاق السعر: من ⁦34 ر.ق⁩ خلال ⁦35 ر.ق⁩

High Sensitivity1/2/12/20Key Membrane Switch Keypad 3*4/ 4*5Matrix Array Matrix Keyboard for Arduino/Robot Car DIY accessories

تحديد أحد الخيارات هناك العديد من الأشكال المختلفة لهذا المنتج. يمكن اختيار الخيارات على صفحة المنتج

21 ر.ق

اختر المنتج
0
    0
    السلة
    السلة فارغةرجوع للمتجر