Micro:bit Terminal Blocks Shield

To connect a bunch of sensor modules to the micro:bit main board, try use our keyestudio new designed expansion shield for micro:bit.

To make connection more direct, the sensor shield has brought out all the IO pins on the edge of micro:bit main board to 3Pin interface. These provide an easy way of connecting circuits using jumper wires. Label G means GND; V is VCC (3.0-3V); S is Signal pin; corresponds to IO pins of micro:bit main board.

There are 3 kinds of hookup methods as follows:

Connect the golden rings on the shield to sensor modules with alligator clip lines;

Connect the sensor modules to the pin headers on the shield with jumper wires;

Connect the green terminal blocks on the shield with lead wire.

There are 4 kinds of power supply methods for the shield and micro:bit main board.

Direct connect the battery case to micro:bit main board for power supply;

Connect the golden rings 3V GND with alligator clip lines for power supply;

Connect random group of V G pin headers with jumper wire for power supply;

Connect the green terminal blocks 3V GND on the shield with lead wire.

The terminal blocks shield comes with 4 fixed holes at the edge, easy to mount on any other devices.

Specification

Operating voltage: DC3.0-3.3V

Pin Pitch: 2.54mm

Green terminal blocks spacing: 3.5mm

Dimensions: 76mm*41mm*12mm

BBC micro:bit 3V Sensor Shield

You can connect the golden rings on the sensor shield to other sensors or modules using Alligator clip line. Or connect the sensors/modules to the pin headers on the sensor shield using jumper wires.

There are 3 kinds of power supply methods for the sensor shield and micro:bit main board.

1)Direct connect the battery case to micro:bit main board for power supply;

2)Connect the golden rings 3V GND with alligator clip lines for power supply;

3)Connect random group of V G pin headers with jumper wire for power supply.

The sensor shield comes with 4 fixed holes at the edge, easy to mount on any other devices.

Specification

Operating voltage: DC3.0-3.3V

Pin Pitch: 2.54mm

Dimensions: 76mm*63mm*12mm

Weight:22.8g